Cisco CDE 220 Series Hardware Installation Manual page 117

Chapter 3 Installing the Content Delivery Engines
Figure 3-21
1 Inner rail assembly
3 Outer rail assembly
Press the locking tab down to release the inner rail and remove it from the rail assembly.
Step 2
Figure 3-22
Place the inner rails on the side of the chassis, aligning the hooks of the chassis with the inner rail so
Step 3
that it snaps securely. Make sure that the rail faces outward so that it fits with the rack-mounting bracket
(see arrow number 1).
Slide the inner rail forward until it clicks into the locked position (see arrow number 2).
Identifying the Rev. B Rails
3
Releasing the Rev. B Inner Rails
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
2
1
2 Middle rail assembly
Installing the CDEs
3-25