Cisco CDE 220 Series Hardware Installation Manual page 187

Appendix A Technical Specifications
CDE420 Specifications
Table A-4
Table A-4
Rack Units
Power
AC Power Rating
DC Power Rating
AC Electrical Input
DC Electrical Input
DC Connector Type
Power Connector Cables
Operating Relative Humidity
Nonoperating Relative
Humidity
Operating Temperature
Nonoperating Temperature
Operating Altitude
Dimensions (H x W x D)
Weight (fully configured)
Approvals: Safety
Approvals: EMC
lists the technical specifications and management information for the CDE420.
CDE420 Specifications
4
100 to 240 VAC or –48 VDC redundant power supplies included in
all models
950 W peak
710 W peak
•
•
See the
DC input voltage range: –48 VDC to –60 VDC
See also the
page
Molex
Wire cable gauge 8 AWG
8 to 90% (non-condensing)
5 to 95% (non-condensing) at temperatures of 73°F to 104°F (23°C
to 40°C)
50 to 95°F (10 to 35°C)
–104 to 158°F (–40 to 70°C)
0 to 4000 m
7.0 x 17.2 x 26 in. (17.8 x 43.7 x 66.0 cm)
96 lb (43.54 kg)
UL/CSA 60950-1
FCC Part 15 (CFR 47) Class A
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
AC input voltage low range—Minimum: 100 VAC,
Maximum: 127 VAC
AC input voltage high range—Minimum: 200 VAC,
Maximum: 240 VAC
"If AC Power Supplies Are Installed" section on page
"If DC Power Supplies Are Installed" section on
2-12.
CDE420 Specifications
2-9.
A-5