Manually Provision A Phone From The Keypad - Cisco 6800 Series Provisioning Manual

Deployment and Provisioning
(configures) the phone. Service providers can authorize VARs or advanced users to manually provision the
phone by using the phone keypad. You can also configure provisioning using the Phone Web UI.
Check the Status > Phone Status > Provisioning from the Phone LCD UI, or Provisioning Status in the
Status tab of the web-based Configuration Utility.
Related Topics
Manually Provision a Phone from the Keypad, on page 9

Manually Provision a Phone from the Keypad

Procedure
Step 1
Press Applications
Step 2 Select Device administration > Profile Rule.
Step 3 Enter the profile rule using the following format:
protocol://server[:port]/profile_pathname
For example:
tftp://192.168.1.5/CP_x8xx_MPP.cfg
If no protocol is specified, TFTP is assumed. If no server-name is specified, the host that requests the URL
is used as the server name. If no port is specified, the default port is used (69 for TFTP, 80 for HTTP, or 443
for HTTPS).
Step 4
Press Resync.
Related Topics
Phone Provisioning Practices, on page 8
.
Cisco IP Phone 6800 Series Multiplatform Phones Provisioning Guide
Manually Provision a Phone from the Keypad
9