Putty Configuration: Logging Window; Putty Settings For Logging In To Cluster 2 Over The Customer Network - EMC VPLEX Installation And Setup Manual

Setting up VPLEX
Figure 38
Figure 39
54 EMC VPLEX with GeoSynchrony 4.1 Installation and Setup Guide

PuTTY Configuration: Logging window

37. Select Session in the Category list, and click Save in the PuTTY Configuration
window to save the settings for the session you configured.
38. Configure PuTTY as shown in
VPLEX service
VPLEX Cluster 1

PuTTY settings for logging in to cluster 2 over the customer network

39. Repeat steps 35 through 37.
40. Select the VPLEX Cluster 1 session and click Load.
41. Click Open, and log in to the management server with username service and
password Mi@Dim7T.
Figure 39, and then click Save.
All session output
File name
putty_log
Type the address of the
public Ethernet port on
the management server
in the second cluster you
are configuring
(default)
Type a name that identifies
the cluster, such as:
VPLEX Cluster 2
(default)
PuTTY3