Putty Settings For Logging In To Cluster 2 Over The Customer Network; Putty Configuration: Scrollback Setting - EMC VPLEX Installation And Setup Manual

26. Launch PuTTY.exe, and configure PuTTY as shown in

PuTTY settings for logging in to cluster 2 over the customer network

Figure 46
27. Select Window in the Category list, and set Lines of scrollback (shown in
Figure 47) to 20000. (This allows you to read long output in a standard-size
PuTTY session window.)

PuTTY configuration: Scrollback setting

Figure 47
28. If you want to save the session output to a log file:
a. Select Logging in the PuTTY Configuration Category list.
b. Under Session logging, select All session output.
c. Type a name in the Log file name field (shown in
VPLEX service
VPLEX Cluster 1
Setting up a VPLEX Metro implementation
Setting up VPLEX
Figure 46.
Type the address of the
public Ethernet port on
the management server
in the second cluster you
are configuring
(default)
Type a name that identifies
the cluster, such as:
VPLEX Cluster 2
(default)
PuTTY3
Set to 20000
scrollback
Figure 48).
63