Putty Configuration: Scrollback Setting - EMC VPLEX Installation And Setup Manual

PuTTY configuration: Scrollback setting

Figure 33
b. If you want to save the session output to a log file:
i.
ii.
iii.
Note: Over the course of setting up a dual-engine or quad-engine cluster, the log
file can grow quite large.
Note: The log file saves data from the current PuTTY session. Any time you open a
new session, you must repeat this step if you want to log the output for that session.
Select Logging in the PuTTY Configuration Category list.
Under Session logging, select All session output.
Type a name in the Log file name field (shown in
page 50).
Setting up a VPLEX Metro implementation
Setting up VPLEX
Set to 20000
scrollback
Figure 34 on
49