Putty Configuration: Ssh Protocol - EMC VPLEX Installation And Setup Manual

Setting up VPLEX
Figure 32
48 EMC VPLEX with GeoSynchrony 4.1 Installation and Setup Guide

PuTTY configuration: SSH protocol

14. For most of the setup tasks, you can leave your laptop connected directly to the
management server, or you can move to a more-comfortable location and
reconnect to the management server over the customer network:
• If you are going to move your connection (as described later), go to step 15.
• If you are going to remain connected directly for the entire setup procedure on
this management server, follow these steps:
Note: You will perform the same steps on the second management server later.
a. Select Window in the Category list, and set Lines of scrollback (shown in
Figure 33 on page
standard-size PuTTY session window).
49) to 20000. (This allows you to read long output in a
SSH protocol
version
putty_ssh