35. Select Window in the Category list, and set Lines of scrollback (shown in
Figure
37) to 20000. (This allows you to read long output in a standard-size
PuTTY session window.)
PuTTY configuration: Scrollback setting
Figure 37
36. If you want to save the session output to a log file:
a. Select Logging in the PuTTY Configuration Category list.
b. Under Session logging, select All session output.
c. Type a name in the Log file name field (shown in
Note: Over the course of setting up a dual-engine or quad-engine cluster, the log file can
grow quite large.
Note: The log file saves data from the current PuTTY session. Any time you open a new
session, you must repeat this step if you want to log the output for that session.
Set to 20000
Figure
Setting up a VPLEX Metro implementation
Setting up VPLEX
scrollback
38).
53