Keypads - ABB ControlIT 53MC5000 Instruction Manual

3.11 KEYPADS

To the right of the display is the vertical keypad and directly beneath the display is the horizontal
keypad . Both keypads have functioning push buttons that are dependent on the instrument mode of
operation which can be either operator/control mode or engineer mode . Mode selection is made
with the Mode ( ) push button on the horizontal keypad. Engineer mode is entered to make the
necessary datapoint entries for controller operation; otherwise, the instrument is left in operator/con-
trol mode for process applications. The operator/control mode functions for the keypad push buttons
vary with the displays; therefore, they are described in Section 4, Operator Displays. Both keypads
for engineering mode operation are described as follows:
Horizontal Keypad:
Push Button Title
F1
F2
F3
Mode
Vertical Keypad:
Button Title
Ascending
Character
Select
Descending
Character
Select
Shift Left
Shift Right
Section 3. Product Description
( F1 ) ( F2 ) ( F3 )
Operator Mode
Back to previous entry line function (Quit).
Pages the configure/display/program functions (see
See Section 4.0
engineer mode command hierarchy in Figure 3-2).
O p e r a t o r
In Module Mode - Selects next PAGE (when in
Displays
Parameter List only)
Executes an Enter or select function.
O p e r a t o r / E n g i n e e r m o d e s e l e c t .
ACKnowledge/SELect.
Configure Datapoint Mode
[Sec. 3.12.4]
D i s p l a y s o n e c h a r a c t e r a t a t i m e i n
ascending alphanumeric order; it is released
when the desired character, number, or
symbol appears on the engineer mode data
entry line.
D i s p l a y s o n e c h a r a c t e r a t a t i m e i n
d e s c e n d i n g a l p h a n u m e r i c o r d e r ; i t i s
r e l e a s e d w h e n t h e d e s i r e d c h a r a c t e r ,
number, or symbol appears on the engineer
mode data entry line.
Shifts the selected character one position left
on the engineer mode data entry line each
time it is pressed.
Shifts the characters on the engineer mode
data entry line one character position right
each time it is pressed.
Engineer Mode
A l s o c a l l e d A C K / S E L f o r
Function
Configure Module Mode
[Sec. 3.12.5]
Scroll up
Scroll down
Scroll left/Previous module
(Parameter list only)
Scroll right/Previous module
(Parameter list only)
3-7