Hanseatic MC-IF7127B2C-A User Manual page 50

Page GB-18 Timer function
Adjusting the cooking time limit.
Sensor Operation
Touch the sensor
for the desired
cooking zone/area.
Touch.
(13)
Set the minute
number unit by
(12)
swiping.
Touch.
(13)
Set the tens num-
ber unit place by
(12)
swiping.
Touch.
The countdown
(13)
begins.
The cooking zone/
area will switch off
after 35 minutes.
A dot in the heat
setting display
indicates that the
cooking time limit is
active.
Notes on the cooking time limit
– You can set independent cooking time lim-
its for all cooking zones/areas.
– If you have activated a cooking time limit
for several cooking zones, the red dot will
flash next to the cooking zone/area with the
shortest time setting.
– If the cooking time limit for a cooking zone/
area has been reached, this cooking zone/
area will be automatically switched off.
– If all cooking zones/areas are switched off,
the hob will also switch off automatically
after a few seconds.
Changing the cooking time limit
You can change a pre-set cooking time limit
D i s p l a y /
at any time.
example
1. Touch the sensor for the cooking zone/
area for which you wish to change the
4
cooking time limit.
The heat setting display for the selected
cooking zone/area will flash.
1 0
2. Touch the timer sensor (13).
The remaining minute number will flash
1 5 for a few seconds in addition to the timer
sensor. Whilst the display is flashing, the
settings can be changed as previously de-
scribed.
1 5
Remove the cooking time limit
3 5
Sensor
3 5
(13)
4 ·
(12)
(13)
(12)
(13)
D i s p l a y /
Operation
example
Touch the sensor
for the desired
4 ·
cooking zone/area.
Touch.
The remaining
2 6
cooking time is dis-
played.
Swipe left until '0' is
2 0
displayed.
Touch.
2 0
Swipe left until '0' is
0 0
displayed.
Touch.
The cooking time
- -
limit is deactivated.
The dot in the heat
setting display has
4
disappeared.