Cooking Area; Booster Function - Hanseatic MC-IF7127B2C-A User Manual

Page GB-14 Cooking zones/areas and sensors
Operating time limit
For safety reasons, each cooking zone/area
is provided with an operating time limit. If the
heat setting is not changed for a prolonged
period of time, the cooking zone/area is au-
tomatically switched off and the residual heat
symbol 'H' is activated.
The maximum operating time is set in accord-
ance with the most recently selected heat set-
ting.
Heat setting Maximum operating time
1, 2, 3
4, 5, 6
7, 8, 9

Cooking area

It makes sense to use the cooking area if you
wish to use a large pot or roaster.
Please ensure that you position the cookware
correctly:
• Always place the cookware in the middle
of the cooking area.
• When using oval or rectangular roasters,
ensure that the middle covers both cook-
ing area sections.
• The cookware should cover at least ¾ of
the cooking area. It is not recommended
to place a circular pot in the middle of a
cooking area.
1. Touch the cooking area sensor (8).
2. Set the desired power output setting us-
ing the slider sensor (12).
8 hours
4 hours
2 hours
(8)

Booster function

When the booster function is active, the cook-
ing zone/area heats up for 5 minutes at maxi-
mum output. After this time the cooking zone/
area will once again revert to the original heat
setting. If the original heat setting was '
heating zone/area will switch to '
The booster function is ideal for searing food
rapidly or for boiling water. It is also suitable
for bringing to the boil rapidly and then contin-
uing to cook at a reduced temperature. Select
a mid-level setting (e.g. '
switch the booster function on.
The booster function can be switched on for
all cooking zones and the cooking area.
1. Press the sensor for the cooking zone/
area that you wish to use the booster
function for.
The heat setting indicator of the cooking
zone/area will flash.
5
2. Press the booster sensor (11).
b
' ' will now light up in the heat setting dis-
play.
3. In order to deactivate the booster function
early, touch the sensor for the cooking
zone/area for which you wish to deacti-
vate the booster function.
4. Press the booster sensor.
b
' ' will go out in the heat setting display
next to the selected cooking zone/area and
the original heat setting will once more be
displayed.
0
' the
9
'.
5
') at first and then
(11)