Notes On Data Safety - ABB ACX Commissioning Instruction

Notes on data safety

Obligations of the
owner
Digital communication
Services and ports on
the Ethernet interface
CI/ACX-EN Rev. D
This product is designed to be connected to a network interface and to communicate
information and data via this network interface.
It is the operator's sole responsibility to provide and continuously ensure a secure
connection between the product and your network or any other network (as the case
may be).
The operator shall establish and maintain any suited measures (such as but not limited
to the installation of firewalls, application of authentication measures, encryption of
data, installation of anti-virus programs, etc.) to protect the product, the network, its
system and the interface against any kind of security breaches, unauthorized access,
interference, intrusion, leakage and / or theft of data or information.
ABB Automation Products GmbH and its affiliates are not liable for damages and / or
losses related to such security breaches, any unauthorized access, interference,
intrusion, leakage and / or theft of data or information.
The ABB guidelines prevent communication through unsecured communication
protocols, provided that the operator does not explicitly allow this.
These communication protocols are blocked by default.
The device software has been supplemented with menu items through which the
operator can explicitly release communication.
The communication protocols are blocked again after software updates and must be
released once again.
Port Description
22/tcp Used only for software updates.
No direct access to the device.
8001/tcp Binary proprietary protocol for:
•
Remote HMI for operation
•
AnalyzeIT program for continuous monitoring
•
OPC Server, external OPC Server for ACX systems
501/tcp Used for Modbus/TCP.
The device allows connection to any Modbus client.
ACX Analyzer System Commissioning Instruction 11