ABB ACX Commissioning Instruction page 74

Setting the Time Zone, Date and Time
Menu Path
Procedure
Daylight Savings Time
Factory Setting
Accept the
Time Settings
74
MENU → Configure → System → Date/Time
Parameter Explanation
Time zone
The time zone can be selected either from the GMT (Greenwich Mean
Time) values or from the continent / country / city list.
Date
Date must be entered in month/day/year format.
Enter year with 4 digits.
Time
Time must be entered in hour:minute:second format.
Enter seconds, too.
The analyzer system is automatically set to daylight savings time.
Note: This applies only when the time zone has been selected from the
continent / country / city list and not from the GMT values list.
The analyzer system is factory-set to the
SET TIME
Press the softkey
ACX Analyzer System Commissioning Instruction
GMT+1
time zone.
to accept the modified time settings.
CI/ACX-EN Rev. D