ABB ACX Commissioning Instruction page 80

Release of communication via port 8001/tcp
Image 1
Message on the Remote
HMI (example)
Release communication
via the proprietary
protocol
80
In ACX, a proprietary protocol has been implemented on port 8001 for communication
with remote clients:
•
In the ACX, communication is blocked on all Ethernet interfaces (X8 / X9) by default.
When communication is blocked, a corresponding message is issued on the Remote
HMI.
Implement the following steps to release communication via the proprietary protocol:
1. Select the '...\Configure\Network\TCP/IP Network' menu.
2. Select the 'Unsecured protocol' menu item
ACX Analyzer System Commissioning Instruction CI/ACX-EN Rev. D