N6603 Slim Imager Engine Reading Distances; N6603 Slim Imager Engine Field Of View/Resolution - Honeywell ScanPal EDA51 Series User Manual

N6603 Slim Imager Engine Reading Distances

The depth of field measurements were taken using these parameters:
Note: Time to Read and Depth of Field are impacted if the bar code symbol is at the edge of
the image.
Guaranteed Specs
Focus
Symbology
5 mil Code 39/128
10 mil Code 39/128
100% UPC
6.7 mil PDF 417
10 mil DataMatrix/Aztec
Typical Specs
Focus
Symbology
5 mil Code 39/128
10 mil Code 39/128
100% UPC
6.7 mil PDF 417
10 mil DataMatrix/Aztec

N6603 Slim Imager Engine Field of View/Resolution

Focus
Horizontal Field Angle (degrees)
Vertical Field Angle (degrees)
Note: DPI can be calculated based on the following formula:
Horizontal DPI = 832 pixels/width of horizontal field of view (inches)
Vertical DPI = 640 pixels/width of vertical field of view (inches)
EDA51 User Guide
• Distances are measured from the top of the engine to the bar code
• 23 °C (+73 °F), 10K lux
• Clear, High quality bar codes
Standard Range (SR)
Near Distance Far Distance
(in/cm) (in/cm)
3.6 (9.1) 5.6 (14.2)
1.9 (4.8) 12.0 (30.5)
2.1 (5.3) 15.1 (38.1)
2.5 (6.4) 6.6 (16.7)
2.9 (7.4) 7.3 (18.5)
Standard Range (SR)
Near Distance Far Distance
(in/cm) (in/cm)
2.5 (6.4) 6.4 (16.3)
1.1 (2.8) 13.0 (33.0)
1.8 (4.6) 16.5 (41.9)
1.8 (4.6) 7.3 (18.5)
2.1 (5.3) 8.0 (20.3)
Standard Range (SR)
±21.2 ±3.5°
±16.5 ±3.5°
Delta
(in/cm)
2.0 (5.1)
10.1 (25.6)
12.9 (32.7)
4.1 (10.4)
4.4 (11.1)
Delta
(in/cm)
3.9 (9.9)
11.9 (30.2)
14.7 (37.3)
5.5 (14.0)
5.9 (15.0)
81