About Status Bar Icons; Remap A Button - Honeywell ScanPal EDA51 Series User Manual

About Status Bar Icons

Status and notification icons show you the current status of your network, the
battery, notifications, and sounds. Use the table below to understand some of the
most common icons.
Status and Notification Icons
Icon

Remap a Button

You can change the default function of the physical buttons and keys.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the plus sign (+).
4. Press the button or key you want to remap.
5. Tap OK.
6. Tap Keys or Applications to view the available functions.
7. Select the function you want assigned to the button. The KEYS or
EDA51 User Guide
Description
Pending alarm and Alarm is set
New text message or
multimedia message
Error with text or multimedia
message delivery
New email
Computer is connected to a PC
with a SUSB cable
Synchronizing data
Error with sync or sign-in
Computer is connected with
Ethernet
> Honeywell Settings > Key Remap.
APPLICATIONS function you selected now appears next to the button or key
name.
Icon Description
Vibrate mode is turned On
Airplane mode is turned On
Bluetooth is turned On
SD card is full
Wi-Fi network is connected with full
signal strength
Wi-Fi network is connected but no
signal strength
Phone connected with full amount
of bars
Phone connected with full amount
of bars but no internet connection
23