Replace The Battery - Honeywell ScanPal EDA51 Series User Manual

Replace the Battery

Caution: Improper battery replacement or incompatible device usage
If your battery power is low, you need to either charge the battery in the computer,
or replace it with a charged battery.
Remove the battery
1. Save all files and close any open applications.
2. Press and hold the Power button until the options menu appears.
3. Tap Power off.
4. Disconnect one end of the hand strap from the computer, if installed.
5. Unlock the battery
6
may result in risk of burns, fire, explosion, or other hazard.
Dispose of lithium-ion batteries according to local regulations.
Risk of fire and burns if improperly handled. Do not open, crush,
heat above 60°C (140°F), or incinerate.
a. Press and hold down the button on the battery latch, and then slide the
latch toward the right side of the computer to unlock the battery.
b. Lift up on the edge of the battery cover and remove it from the computer.
EDA51 User Guide