Insert A Microsd Card; How To Transfer Files - Honeywell ScanPal EDA51 Series User Manual

Setting
Default notification
sound
Default alarm sound
Phone ringtone
Other sounds and vibrations
Screen locking sounds
Charging sounds
Touch sounds
Vibrate on tap

Insert a microSD Card

You can use a microSD card to increase file storage capacity or to install software.
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD or microSDHC memory cards with the computer for maximum
performance and durability.
Note: Format the memory card before initial use.
1. Remove the battery from the computer, refer to
2. Insert the MicroSD card.
3. Insert the battery, see on

How to Transfer Files

To transfer files you need to physically connect the EDA51 mobile computer to your
workstation (e.g., laptop or desktop computer) through a USB connection. When
the mobile computer is connected and USB is configured for file or photo transfer,
EDA51 User Guide
Description
Select a notification sound.
Select an alarm sound.
Select a default ringtone.
Enable or disable an audio tone when the screen is locked.
Enable or disable an audio tone when the computer is charging.
Enable or disable audio sounds when you use the touch screen.
Enable or disable vibrate mode when you touch the screen.
Micro SD Card
page 7.
page 6.
17