Install Ota Updates - Honeywell ScanPal EDA51 Series User Manual

Install OTA Updates

To use the HUpgrader to install an OTA update file downloaded from the
Support Downloads
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the toggle button to turn Provisioning mode On.
4. Save the OTA file (*.zip) in the following folder on the EDA51 computer:
5. Tap HUpgrader
6. Tap
7. Select the storage location (i.e., Internal Storage) where you saved the file.
8. Tap the OTA update file. The computer examines the file, and then starts the
9. Once the installation is complete (100%), select OK when prompted to Reboot
74
Portal.
> Provisioning mode under Honeywell Settings.
• Internal shared storage\Download
in the upper right corner, and then tap Select OTA from storage.
installation.
the computer. The computer reboots and finishes the update.
to open the Honeywell Updater app.
Technical
EDA51 User Guide