Otto Bock 1C68 Triton side flex Instructions For Use Manual page 23

2) Rinse the soap away with clear fresh water. In doing so, rinse the foot­
shell until all dirt has been removed.
3) Dry the product with a soft cloth.
4) Allow to air dry in order to remove residual moisture.
7 Maintenance
► A visual inspection and functional test of the prosthetic components
should be performed after the first 30 days of use.
► Inspect the entire prosthesis for wear during normal consultations.
► Conduct annual safety inspections.
8 Disposal
In some jurisdictions it is not permissible to dispose of the product with
unsorted household waste. Improper disposal can be harmful to health and
the environment. Observe the information provided by the responsible
authorities in your country regarding return, collection and disposal proced­
ures.
9 Legal information
All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
9.1 Liability
The manufacturer will only assume liability if the product is used in accord­
ance with the descriptions and instructions provided in this document. The
manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthor­
ised modification of the product.
9.2 CE conformity
The product meets the requirements of Regulation (EU) 2017/745 o n medic­
al devices. The CE declaration of conformity can be downloaded from the
manufacturer's website.
10 Technical data
Sizes [cm]
With slim
footshell
1C68 Triton side flex
Heel height
[mm]
System height
[mm]
22 23 24 25
15 ± 5
57 57 58 63
26 27 28 29
−
63 68 −
30
23