Controls - Source Audio Collider Delay+Reverb User Manual

Controls

Delay Knob (Time/Pre)
REVERB Mode: Sets the amount of time between the dry signal and the initial reverb reflections. As
the DELAY knob is turned clockwise the pre-delay time increases creating a sound similar to a natural
echo or "slapback" effect.
DELAY Mode: Adjust the delay time, or speed of the repeats. Turn counter-clockwise for short,
"slapback" style repeats, or clockwise for long, ambient repeats.
Mix Knob
Sets the relative levels of the wet and dry signals. Fully counter-clockwise is 100% dry, fully clockwise
is 100% wet. Roughly 3 o'clock on the MIX knob is where a 50/50 split between wet and dry occurs.
In Parallel Mode, the MIX knob controls the mix of both effects simultaneously. However, you can
still control the relative levels of each effect using the OUTPUT control. Please note that Kill Dry
Mode is also available as a global option (see Kill Dry Mode in the Neuro
this manual).
SA263 Collider Delay+Reverb Owner's Manual
Hardware Options section of
13