Source Audio Collider Delay+Reverb User Manual page 16

immediately upon bypassing the pedal. Trails Mode (also known as "Soft Bypass") is an optional
bypass mode that allows the delay/reverb trails to fade out naturally after the effect has been
bypassed.
Trails mode can be enabled from the
Editor. It is also possible to put the pedal into Trails mode by pressing the O
holding the C
ONTROL
the setting will be saved automatically. Trails Mode is a global setting and is NOT saved per preset.
Delay On/Off LED
The ON/OFF LED above the D
bypassed (not lit). This LED also monitors the rate of Tap Tempo with alternating red and green
blinks.
Reverb On/Off LED
The ON/OFF LED above the R
bypassed (not lit).
Reverb Hold Function with Dual Processor Architecture
One of the great advantages of the Collider Delay+Reverb's dual processor architecture is the
opportunity it offers to the Hold function. The Hold function sustains any Reverb engine's wet signal
indefinitely while pressing down on the REVERB footswitch. As with most effects units that offer
some type of a Hold (a.k.a. "Freeze") function, it is also possible to continue playing over the top of
the sustained reverb tail. Collider provides the exciting new functionality of being able to play with
delay engaged while holding the reverb trail...all in one pedal.
Control Input Button
This small button located at the top of the pedal is used when configuring external control. See the
External Control section for more details.
External Control LED
The small LED located to the left of the M
that external control mode (expression or MIDI) is active or that incoming data is being received via
MIDI or a Neuro connection. For more information, see the
SA263
Hardware Options
I B . This will toggle between enabling and disabling trails mode and
NPUT UTTON
/T F
ELAY AP OOTSWITCH
F
EVERB OOTSWITCH
K
IX NOB
Collider Delay+Reverb Owner's Manual
menu of the Neuro Mobile App or Desktop
indicates if the delay effect is active (lit green) or
indicates if the reverb effect is active (lit red) or
is the C /ACTIVITY L
ONTROL
External Control
/O F while
N FF OOTSWITCH
. When lit, it indicates
ED
section.
16