Source Audio Collider Delay+Reverb User Manual page 4

External Loop – Configure external loop mode to insert external effects within Collider's signal chain.
Full MIDI Implementation – Collider's parameters can be accessed and controlled using MIDI
messages via its 5-pin DIN Input, a Neuro Hub connection, or USB port. Use MIDI messages to
engage/disengage the pedal, change presets, move parameters with a MIDI expression controller,
and more. Class compliant USB-MIDI allows the Collider to work as a plug-and-play device with
recording software running on Mac and Windows.
External Control – Easily configured the Collider to work with a variety of expression pedals and
footswitches for various external control options
Discover Knobs Position – Located in the Hardware Options on the Neuro Editors, this function
allows you to "discover" where the pedal's knobs are set in each preset, via the Control LED flashing
when you've reached the correct knob position on the dial.
SA263 Collider Delay+Reverb Owner's Manual 4