Changing The Screen Layout - Yealink VC880 User Manual

Related concepts
Wired Sharing
Changing the Video Input Source When not in a Call
Before you begin
To use the PC input source, make sure that your system is connected to a PC.
Procedure
1. If
on your remote control is set as Input key by your system administrator, press
input source.
The monitor shows Camera and PC input sources.
2. Select the desired input source, and then press OK key.
The monitor shows the selected source.
Changing the Video Input Source in a Call
Before you begin
To use PC input source, make sure that your system is connected to a PC.
Procedure
1. On your remote control, do one of the following:
•
If is set to Input key by your system administrator, press
•
Press or OK key to open Talk Menu, and then select Input Choose.
The monitor shows Camera, Camera +PC and PC input sources.
2. Select the desired input source, and then press OK key.
• If you select PC, the remote video image is shown in big size, and the PC content is shown in small size
(Picture-in-Picture).
• If you select Camera+PC, the PC content is shown in big size, and other video images are shown in small
size.
• If you select Camera, the remote video image is shown in big size, and the local video image is shown in
small size (Picture-in-Picture).
3. Press
to return to the Call screen.

Changing the Screen Layout

The screen layout depends on the number of connected callers, the display device (single or dual), and whether the
presentation is ongoing.
Available Screen Layouts
•
Changing the Screen Layout
•
• Single Display Screen Layouts
• Two-Way Display Screen Layouts
• Specifying Content to the Secondary Screen
Available Screen Layouts
The system supports the following layouts:
• 1+N: in this layout, the assigned participant is given prominence in the largest pane no matter who is currently
speaking, and other participants are displayed in a strip beside the assigned speaker.
to enable the video
to enable the video input source.
| Settings | 87