FINAPRES Finometer Model-2 User Manual page 92

92 Finometer® Model-2
portable and m
The Finometer® Model-2 is intended for use in the e ctromagnetic
disturbances are controlled. The customer or the user of th Finome
electromagnetic interference by maintaining a minimum di ance be
communication equipment (tran mitters) and the Finome r® Mod s
according to the maximum output power of the communications eq
Rated maxi mum
output power of
transmitt er
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separati
distance d in metres (m) can be estimated using the equation appli
transmitter, where P is the maximum output power rating of the tra
to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the
NOTE 2 These guidelines may not apply in all situation. Electroma
absorption and reflection from structures, objects and pe
Information reference: electromagnetic emissions (IEC 60601-1-2:2001, table 206)
User's Guide
Re commended separation distance between
obile RF comm un
Finomete r®
le
s
S paration distance acco e
15 0 k Hz to 8 0 MHz 80
d = 1, √P 2
0, 12
0,38
1,2
3,8
12
ications eq uipm ent and the
Model-2
environment in which radiated RF
e ter® Model-2 can help prevent
st tween portable and mobile RF
te el-2 as recommended below,
uipment.
rdi ng to frequency of transmitter
m
MHz to 800 MHz 800 MH
d = 1, 2 √ P
0,12
0,38
1,2
3,8
12
cable to the frequency of th
nsmitter in watts (W) according
higher frequency r
gnetic propagation is affected by
ople.
z to 2,5 GHz
d = 2,3 √P
0,23
0,73
2,3
7,3
23
on
e
ange applies.