Air Pressure, Finger Cuff Error Messages - FINAPRES Finometer Model-2 User Manual

7.2.2 Air pressure, fing
Error message
CHECK AIR SUPPLY
/
UNACCEPTABLE P V
PRESSURE LOW
PRESSURE TOO LOW
MEAN PRES HIGH
UNSTABLE PRES
Finometer® Model-2
er cuff error messages
Marker Action
message
The pump system fails to generate enough pre
or flow:
• Check if th
Frontend Unit.
• Check the air hose between the Frontend Unit
and main unit.
• Check for leaks or kinks.
If the error persists, have the d
Finapres Medical Systems B.V.
64001 A pressure and/or plethysmogram error has
occurred. Pressure has been below 10 mmHg, or
above 250 mmHg for 2.5s, or the plethysmo
was not sufficiently small during the measureme
• Retry.
• Check if the fi
around the finger.
• cf. '
CHECK AIR SUPPLY
64000 Mean pressure is too low. Mean pressur
below 10 mmHg for 2.5s, or too low when
perform a Physiocal.
64003 Pressure is
is measu re d being below 30 mmHg during
Physioc al.
64002 Mean pressure is too high. Mean pressure has been
above 250 mmHg for 2.5s
During the pressure staircase procedure at start-up
or during a physiocal, constant pressure levels were
not stable enough:
• Check if the finger cuff air hose is inserted in the
Frontend Unit.
• Retry.
If the error persists, have the device checked by
Finapres Medical Systems B.V.
User's Guide
e finger cuff air hose is inserted in the
evice checked by
nger cuff is wrapped tight enough
' and '
CONNECT CUFF CABL
to low during a Physiocal, the pressure
73
ssure
gram
nt:
' errors.
e has been
trying to