FINAPRES Finometer Model-2 User Manual page 87

The following power supply cords can be used for the countries specified in
the table:
Object / Manufacturer /
part NO trademark
Cord set Eurlectric
(Europe)
Cord set WELL SHIN
(UK)
Cord set Different
(Europe) Manufac-
turers
Cord set * Ta Hsing
(USA,CAN)
Cord set * Different
(USA,CAN) Manufac-
turers
Table 9.3 Power cord set
• For patient care equipment, where a "Hospital Grade" or "Hospital Only" MAINS
PLUG exist for the particular electrical rating in question, the MAINS PLUG of non-
PERMANENTLY INSTALLED EQUIPMENT with a protective earth connection shall
comply with the requirements for a hospital grade attachment plug (mains plug) or
the non-hazardous location locking type designated "Hospital Only" as specified in
the Standard for Attachment Plugs and Receptacles UL 498.
Finometer® Model-2
Type / Technical data
model
2pole, Plug: 10/16
class I A,250V
H05VV-F Cord: 3xmin 0,75
mm2 appliance
Coupler:
10A,250V
2pole, Plug: 10A,250V
class I Cord: 3xmin 0,75
H0 5VV-F mm2 appliance
Coupler:
10A ,250V
2pole, Plug: 10 /16
class I A,250V
H05VV -F Cord: 3xmin 0,75
mm2 appliance
Coupler:
10A,250V
2pole, Plug: 10A, 125V
class I Cord: 3 x AWG
SVT 18 appliance
Coupler: 10A,
125V
2pole, Plug: 10A, 125V
class I Cord: 3 x AWG
SVT 18 appliance
Coupler: 10A,
125V
87
User's Guide
Standard Mark(s) of
con formity
IEC603 KE MA,
20 VD E,
HD21 (CENELEC)
IEC ASTA
60320
C13
IEC603 CENELEC
20 approved
HD21
IEC603 UL,CSA
20
C13
IEC603 UL,CSA
20
C13