Table of Contents
Advertisement
8
Maintenance, storage and calibration
8.1
Maintenance
The Finometer® Model-2 device contains no field serviceable parts.
It is recommended to send the unit to Finapres Medical Systems B.V.
every two years for a general inspection and calibration check.
An appointment for a service checkup can be made through customer
support (see page 9).
8.2
Cleaning
The Finometer® Model-2 housing is made of materials that do not
easily attract dust. If cleaning is needed follow the instructions below:
•
Always first unplug the power cord.
•
Wipe clean using a soft, slightly moistened cloth.
•
Never apply liquid directly to the units of the device or its
associated units, such as the Frontend Unit.
•
Do not immerse the device.
•
Never use alcohol, refined petrol, thinner, or other strong chemical
agents that could damage the Finometer® Model-2 housing.
•
Do not allow any water to enter the Finometer® Model-2 device or
its units.
•
For cleaning the finger cuffs we recommend to use Neodisher
MediClean forte (www.drweigert.com). The finger cuffs (but not
cable and air tube) can be immersed in this liquid without affecting
the bonding of the cuff. Should liquid accidentally enter the finger
cuff or air hose, then try to shake it out and allow enough time to
dry.
Use the same cautions when cleaning the accessories such as the
Height Correction Unit, finger cuffs or the I/O unit.
Finometer® Model-2
77
User's Guide
Hide quick links:
Advertisement
Table of Contents
