FINAPRES Finometer Model-2 User Manual page 89

The non-observance may result in increa
immunity of the Finometer® Model-2.
Th e Finometer® Model-2 sh
with other equipment and that if ad
the Finometer® Model-2
in the configuration in which it will be used.
Electromagnetic emissions
The Finometer® Model-2 is intended for use in the electromagnetic environment specified
below. The customer or the user of the Finometer® Model-2 should assure that it
in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
I nformation reference: electromag
Finometer® Model-2
sed emissions or decreased
ould not be used adjac
jacent or stacked use is necessary,
should be observed to ver
Compliance Electromagnetic environment -
The Finometer® Model-2 uses RF
energy only for its internal function.
Therefore, its RF emissions are very
Group 1 low and are not like
interference in nearby electronic
equipment.
The Finometer® Model-2 is suitable
Class A for use in all establishments other
than domestic and those directly
connected to the public low-voltage
power supply ne
Class A
buildings used for domestic purpose.
Complies
netic emission s (IEC 60601-1-2:200
89
User's Guide
ent to or stacked
ify normal operation
is used
guidance
ly to cause any
twork that supplies
1, table 201)