Using The Control Keypad; Control Keys - FINAPRES Finometer Model-2 User Manual

4

Using the control keypad

4.1

Control keys

The keypad of the Main Unit has four keys. These keys have a main
function and a secondary function which depends on the mode
Finometer® Model-2 is in.
Key name Main function
/ • Start a measurement
START STOP
• Stop, return to Ready Mode
• Switch on/off Physiocal
PHYSIOCAL
• Event marker key when in
MARKER
• Perform Height Correction
HEIGHT
• Check runtime information
& • Go into the configuration
MARKER
PHYSIOCAL
Table 4.1 Finometer® Model-2 control key functions
(physiological calibrations)
when in Run mode (while
performing a measurement)
Run mode
Unit nulling procedure when
in Ready
mode
when in Run mode
menu, only active in ready
mode (see 5.4)
Finometer® Model-2
Secondary function
ENTER
(PRESSURE UP, during
Steady Pressure Calibration
see 8.4)
(NEXT CONFIGURATION
ITEM, when the
configuration menu was
entered see 5.4)
(PRESSURE DOWN, during
Steady Pressure Calibration
see 8.4)
41
User's Guide