FINAPRES Finometer Model-2 User Manual page 63

airhose are now at the back of the hand and should point towards
the Frontend Unit.
3. Make sure the fin
knuckles, touching each knuckle (Figure 6-2).
photocell
Figure 6-2 Applying the finger cuff
4. Wrap the finger cuff tightly for best performance. The finger cuffs are
designed in such a way that correct wrapping is almost natural.
Check that it is not easy to rotate the finger cuff after application.
A common mistake is to wrap the finger cuff not tight enough.
5. Guide the cuff cable and air hose be
the hand and connect them to the Frontend Unit which is worn on
wrist (see Figure 6.3).
Fig ure 6.3 Connecting the finger cuff to the Frontend Unit
ger cuff is placed in the middle between the two
LED
Finometer® Model-2
A
tween the fingers to the back of
63
User's Guide
the