Setup Utility - Panasonic CF-Y2 Series Reference Manual

Setup Utility

Running the Setup Utility
The Setup Utility sets the computer's boot-up operating environment, i.e. passwords, startup
drive, etc. The following six menu items are available:
[Information], [Main], [Advanced], [Security], [Boot], [Exit]
1
Turn on or restart the computer.
2
F2
Press the
after the computer begins the startup procedure.
When the password is set, the screen shown at left will be displayed. Enter your
password, and press the Enter key.
When inputting the Supervisor Password
You can register all items of the Setup Utility
When inputting the User Password
On the [Advanced] and the [Boot] menu:
• You can view the settings, but cannot change it
On the [Security] menu:
• [Clear registered SD card], [Set Supervisor Password] and [Hard Disk
Lock] will not be displayed
• [Password on boot], [SD Startup], [SD Setting Method], [Setup Utility
Prompt], [Boot First Menu] and [User Password Protection] will be
displayed, but cannot be set
• The User Password can be changed only when [User Password
Protection] has been set to [No Protection]. The User Password cannot be
deleted
On the [Exit] menu:
• [Get Default Values] option will not be displayed
The F9 key does not work
NOTE
Cannot display the Setup Utility screen in simultaneous display.
By pressing the Fn+F3 key, display destinations can be changed either external
display or the internal LCD.
key while [Panasonic] boot screen is displayed soon
147