Panasonic CF-Y2 Series Reference Manual page 54

Security Measures
Setting the Password on boot (enabling, disabling)
Starting Up When the Password on boot is Set
1
Run the Setup Utility. (
2
Using either the
3
Using either the
Enter
press the
4
Select [Enable] or [Disable].
To enable the Password on boot:
Using the
To disable the Password on boot
Using the
5
F10
Press the
The screen shown at left is displayed.
and press the Enter key.
*1
Enter your password
When the correct password is input, the computer will start
After 3 wrong password attempts have been made or there is no input for one minute, the
computer will power off
*1
Supervisor Password or User Password set in the Setup Utility (not the Windows password).
page 147)
key or the key, select [Security].
key or the key, select [Password on boot] and
key.
key, select [Enable] and press the Enter key
key or the
key, select [Disable] and press the Enter key
key and the
key and select [Yes], then press the
54
Enter
key.