Panasonic CF-Y2 Series Reference Manual page 118

External Display
You can connect an external display to use a large screen, or connect an LCD projector to
give a presentation.
For explanations of display mode terminology, refer to "Read Me First" (
1
Power off your computer.
(⇒ Operating Instructions "Starting Up/Shutting Down")
Do not connect or disconnect devices while the computer is in standby or
hibernation mode.
2
Connect the external display to the external display port (A) on your
computer.
3
Turn on the external display, then turn on your computer.
4
Change the display destination.
There are two methods to change the display destination. Do not change the
display destination using any method other than the following ones.
Press the Fn+F3 key. (
• Extended Desktop (
• Do not press any keys or slide the power switch until the display
destination has changed completely
Use [Intel(R) 82852/82855 MG/GME Graphics Controller] screen
page 20)
page 121) switching cannot be used
118
page 4).