Starting The Setup Utility - Panasonic FZ-G2 Series Manual

Setup Utility
You can make the settings of the computer's operating environment (password settings, startup drive selection, etc.)

Starting the Setup Utility

1. Click (Start) -
2. Click [Restart now] under "Advanced startup"
*1: Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For
example, [Advanced start-up] may be displayed instead of [Advanced startup] in some language preference.)
3. Click [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].
The computer restarts, and the Setup Utility screen appears.
When [Enter Password] is displayed, enter your password.
When you start the Setup Utility with Supervisor Password
You can make the settings of all items of the Setup Utility.
l
When you start the Setup Utility with User Password
Note the following:
l
In the [Advanced] and [Boot] menus, you cannot make the settings of all items.
l
In the [Security] menu, you can change only the User Password when [User Password Protection] is set to [No Protection]. You cannot
l
delete the User Password.
In the [Exit] menu, you cannot make the setting of [Load Default Values] and [Boot Override].
l
To set Setup Utility, alternatively you can use touch input and pen input.
Using touch screen:
Double-touch the setting value to be changed, select the new value, and touch it again.
Using on-screen keyboard:
To input characters and symbols, touch
To operate special keys such as a function key, touch [SYM] on the on-screen keyboard so that the key is highlighted as illustrated below.
Using tablet buttons:
The tablet buttons operates at follows.
: Move to the item below.
l
: Move to the item right.
l
(Settings) - [Update & Security] - [Recovery].
*1
.
at the upper right corner of the Setup Utility screen to display the on-screen keyboard.