Specifications; Setup Utility - Panasonic CF-WWL282 Supplementary Instructions Manual

Hide thumbs Also See for CF-WWL282:
Table of Contents

Advertisement

Supplementary Instructions

Specifications

Add the following information.

Setup Utility

Replace the "Advanced Menu" for the following.
8
LAN
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
Wireless LAN
IEEE 802.11b compliant
Frequency 2.4GHz band
Device Configuration:
Serial Port A:
Serial Port B:
IrDA Port:
MP Serial Port :
Parallel Port:
Mode:
Sound Controller:
CardBus Controller A:
CardBus Controller B:
Modem:
LAN:
Boot up from LAN:
Wake up from LAN:
Parameters
(
: Default)
CardBus Controller B
*
1
LAN
(Only for models with LAN port)
Boot up from LAN
Wake up from LAN
*
1
In [CardBus Controller B], set the Wireless LAN to enable/disable.
*
2
This function may not be displayed depending on model.
[Disable] is automatically set when [LAN] is set to [Disable].
*
3
[Disable] is automatically set when [LAN] is set to [Disable].
Wake up function works on Windows 98 or Windows 2000 irrespective of the [Wake up from LAN]
setting.
When the [Wake up from LAN] has been enabled;
In the OFF state, if you are not recharging your battery pack or if the pack is fully charged, your computer
consumes approximately 3.0 W.
"OPERATING INSTRUCTIONS "
"REFERENCE MANUAL"
[BIOS]
[Auto]
[Disable]
[Auto]
[Disable]
[Auto]
[ECP]
[Enable]
[Enable]
[Enable]
[Enable]
[Enable]
[Disable]
[Disable]
Disable
Enable
Disable
Enable
Disable
2
*
Enable
Disable
*
3
Enable

Advertisement

Table of Contents
loading

Table of Contents