Panasonic CF-Y2 Series Reference Manual page 89

Watching DVD Video (WinDVD)
To change the auto-repeat setting values, right-click above the WinDVD screen, click on
[Repeat], and select auto-repeat setting values from the menu.
Auto-repeat is a function that plays contents repeatedly for a fixed period of time. You can
set the length of the repeat time at 1, 2, 4, or 8 seconds.
When the number of display colors is increased, a message
appears and the DVD cannot be played
Reduce the number of display colors
Right-click on the desktop, and click [Properties] - [Settings] - [Advanced] - [Troubleshoot],
and maximize the value of Hardware acceleration.
Before playing a DVD-Video, [Confirm Region] appears.
Refer to "About Regions Setting" (
Frame dropping may occur (images or sounds are disrupted)
Immediately after resuming from a pause, frame dropping may occur depending on the
operating environment or DVD video (images or sounds are disrupted)
If you cannot play the disk contents smoothly:
In the case of some operating environments or DVD videos, playback may not be smooth,
or audio may become distorted when using fast-forward ("time stretch")
A
Right-click on the WinDVD screen, click [Setup] - [Video].
B Confirm that the check mark is added to [Use Hardware Decode Acceleration].
Do not add a check mark in [Use Hardware Color Acceleration].
The display may flicker, depending on the disk. In this case, delete the check mark for
[Use Hardware Decode Acceleration] using step
In the Extended Desktop or simultaneous (internal/external) display mode, there are times
when images or video are not displayed correctly
If the DVD video software other than WinDVD has been installed, the images and videos
may not be displayed properly (
page 76)
B
described above
page 86)
89