Standby - Panasonic CF-Y2 Series Reference Manual

Standby/Hibernation Functions
Starting Up Your Computer Quickly
Differences between the Standby and Hibernation Functions
Entering the Standby or Hibernation Mode
If you use the standby or hibernation function, you can shut down the computer without
closing programs and documents. When restarting your computer from either the standby or
hibernation mode, you can immediately continue working in all programs or documents that
were open at the time the computer was placed into standby or hibernation mode.
Function Where data is
saved to

Standby

Memory
function
Hibernation Hard disk
function
NOTE
We recommend plugging in the AC adaptor if the standby function is to be used for a
long period of time. If the AC adaptor cannot be connected, we recommend that
hibernation mode be used instead of the standby mode
If the standby or hibernation function is used repeatedly, the computer may not work
properly. To stabilize computer operations, shut down Windows on regularly basis
(about once a week) without using the standby or hibernation function
Use any of the following methods to enter the standby or hibernation mode.
To use the hibernation mode, set [Power Options] in advance (
(Enabled in factory preset)
Press the Fn+F7 key or the Fn+F10 key to put your computer in the standby or hiberna-
tion mode ( page 21)
Using the power switch (
Closing the display (
Time until Need for power supply
resume
Short Yes
(if power is cut, all data is lost)
Rather long Power is not required to maintain data
page 45)
page 46)
42
page 43).