Panasonic CF-Y2 Series Reference Manual page 165

Dealing with Problems (Advanced)
Starting Up
When the previous item is not the
cause
Enter Password
Even after entering the password,
[Enter password] is displayed again
Press the F9 key in the Setup Utility. This will restore the Setup Utility's
settings to their default values (except the password settings) (
Try removing all peripheral devices
Check a disk error using the following procedure:
A
Display [Local Disk (C:) Properties].
Click [start] - [My Computer], right-click [Local Disk(C:)] and click
[Properties].
B
Click [Tools] - [Check Now].
C
Click [Start] after selecting required items in [Check disk options].
At startup, hold down the F8 key when [Panasonic] boot screen disappears
and release your finger when the Windows Advanced Options Menu is
displayed. Start the computer in Safe Mode, and confirm the details of the error
*1
When [Password on boot] is set to [Enable], [Enter Password] appears after the
[Panasonic] boot screen disappears. Hold down the
password and pressing the
The computer may be in ten-key mode
lights up, press the NumLk key, to disable the ten-key mode, and then
If
input ( page 26)
The computer may be in Caps Lock mode
lights up, press the Caps Lock key, to disable the Caps Lock mode,
If
and then input ( page
F8
Enter
key.
25)
165
page 147)
*1
key soon after inputting the
,