Panasonic CF-Y2 Series Reference Manual page 65

DVD MULTI Drive
About the Optical Disc Drive Power-Saving Utility
NOTE
This utility only works with the built-in DVD MULTI drive in this computer. It will not
work with external CD/DVD drives.
This utility automatically turns the drive power off after the DVD MULTI drive power has been
turned on, or after a disk has been removed from the DVD MULTI drive, if a certain period of
time passes during which a disk is not set in the drive. You can turn the drive power off
immediately using [Manual Switching].
At the time of purchase, this period is set at 3 minutes.
To turn the power on again after it has turned off:
You can turn the drive power on using [Manual Switching].
<CF-Y2 series>
You can also turn the drive power on by sliding the drive power/open switch to the left.
<CF-W2 series>
You can also turn the drive power on by sliding the open lever, however, the disk cover will
open.
When a disk formatted using B's CLiP has been set:
• If the utility does not turn off automatically even after the media has been removed, turn
it off manually. ( page
• When the icon is displayed on the notification area, the DVD MULTI drive power can
not be turned off. In this case, right-click the
disk. To turn the power off soon, after a disk has been removed, turn the drive power off
using [Manual Switching].
The drive power will not turn off automatically when an external CD/DVD drive has been
connected.
When WinDVD is running, this utility cannot be used to turn off the power of the DVD
MULTI drive.
Change the time until the power turns off
1
Select the
66)
icon or the icon on the notification area.
65
icon and click [Eject], then eject the