Setup Utility - Panasonic Toughbook CF-07 Series Reference Manual

Setup Utility

Running the Setup Utility
<Only when the port replicator is connected>
NOTE
Setup Utility can be run only when the port replicator, external display and external
keyboard are connected.
1
Power off your computer
Do not shut down using the standby or hibernation mode.
2
Connect your computer to the port replicator, external display,
external keyboard and external mouse
( Operating Instructions of the port replicator,
3
Turn on your computer
4
Press F2 while [Press <F2> to enter SETUP] is displayed soon
after the computer begins the startup procedure
(If you fail to press F2 at this time, restart your computer.)
If [Enter Password] is displayed
Enter your password.
(The Supervisor Password must be entered to change items of the [Advanced]
menu. Entering the User Password will not allow you to make changes to any of
the items.)
NOTE
For more details, on-line help is available; press
To close the Setup Utility, see
Key Operations
:
F1 To display the corresponding "help" file.
:
Enter To display sub-menu.
:
Esc To display [Exit] menu.
:
To move among the menus.
:
To move among the items.
:
F5 F6 To move among the values.
:
F9 To set default settings.
(When starting up the Setup Utility with the User Password, this key is not
available.)
:
F10 To save the settings and exit.
( "Starting Up/Shutting Down")
page
F1 .
page 34.
29
23)