Set The Alert Volume; Set The Handset Vibration Mode - Cisco IP DECT 6800Series User Manual

Settings
Step 4 Press up or down on the ring of the navigation cluster
Step 5
Press Play to hear the tone.
Step 6 Press Select to save the tone.

Set the Alert Volume

You can change the volume of the tone that you hear when you press Emergency
You can't change the alert volume of the 6823 Handset.
Procedure
Step 1 Press Menu
Step 2
Select Settings
Step 3
Press right or left on the ring of the navigation cluster
Step 4 Press Ok to save the level.

Set the Handset Vibration Mode

You can set the handset to vibrate when you have an incoming call.
You can't set the 6823 Handset to vibrate mode.
Procedure
Step 1 Press Menu
Step 2
Select Settings
Step 3 Highlight your choice.
• Off (default): When an incoming call rings on the handset, the handset doesn't vibrate.
• Vibrate then ring: When an incoming call rings on the handset, the handset vibrates and then rings.
• Vibrate only: When an incoming call rings on the handset, the handset vibrates. You do not hear the
• Vibrate and ring: When an incoming call rings on the handset, the handset vibrates and rings at the
• Alert tone
.
> Audio settings > Alert volume.
.
> Audio settings > Vibrate.
ringtone.
same time.
Set the Alert Volume
to highlight a tone.
.
Cisco IP DECT 6800 Series User Guide
.
73