Cisco IP DECT 6800Series User Manual page 12

Your Handset
Device
Cisco IP DECT 210 Multi-Cell Base Station
Cisco IP DECT 110 Repeater
Note This document covers the Cisco IP DECT 6800 Series only. This series is different from the Cisco IP Phone
6800 Series Multiplatform Phones. For information on the Cisco IP Phone 6800 Series Multiplatform Phones,
see https://www.cisco.com/c/en/us/support/collaboration-endpoints/
ip-phone-6800-series-multiplatform-firmware/series.html
Figure 1: Cisco IP DECT Phone 6823 Handset, Cisco IP DECT Phone 6825 Handset, Cisco IP DECT Phone 6825 Ruggedized Handset, Cisco
IP DECT 110 Repeater, Cisco IP DECT 210 Multi-Cell Base Station, and Cisco IP DECT 110 Single-Cell Base Station
The handsets communicate with the base station and repeaters using Digital Enhanced Cordless
Telecommunications (DECT).
If you need to use a handset in a volatile, dusty, or damp environment, you can use the Cisco IP DECT Phone
6825 Ruggedized Handset. This handset is IP65-rated, which means that the handset is sealed to protect it
from dust and water.
The Cisco IP DECT Phone 6823 Handset is similar to the Cisco IP DECT Phone 6825 Handset, except for
these differences. The use of keys and display of icons may differ between the two handsets.
Feature
Screen
Emergency button
Cisco IP DECT 6800 Series User Guide
2
Symbols
Cisco IP DECT Phone 6825 Handset
Display: 2 inches
Resolution: 240 x 320 pixels
Present
Your Handset
Cisco IP DECT Phone 6823 Handset
Display: 1.7 inches
Resolution: 128 x 160 pixels
Not present