Change The Settings Pin; Set The Handset Name - Cisco IP DECT 6800Series User Manual

Settings
Step 2
Select Settings
Step 3 Highlight your choice.
• Off (default): The keypad never locks.
• 15 seconds: The keypad locks in 15 seconds.
• 30 seconds: The keypad locks in 30 seconds.
• 45 seconds: The keypad locks in 45 seconds.
• 1 minute: The keypad locks in 1 minute.
• 2 minutes: The keypad locks in 2 minutes.
• 3 minutes: The keypad locks in 3 minutes.
• 4 minutes: The keypad locks in 4 minutes.
• 5 minutes: The keypad locks in 5 minutes.
Step 4 Press Select to save the setting.
Related Topics

Change the Settings PIN

You can set the handset to require a PIN before the handset can reset to the default settings.
The default PIN is 0000.
Procedure
Step 1
Press Menu
Step 2 Select Settings
Step 3
Enter the current PIN and press OK.
Step 4 Enter a new PIN and press OK.
You must use four digits for the PIN.
Step 5 Press Select to save the setting.

Set the Handset Name

You can give the handset a name. The name displays on the main screen of the handset.
> Security > Automatic keylock.
Lock the Handset Keypad, on page 7
Unlock the Handset Keypad, on page 7
.
> Security > Change PIN.
Change the Settings PIN
Cisco IP DECT 6800 Series User Guide
79