Smartgen HGM6100N Series User Manual page 3

4 OPERATION
4.1 KEYS DSCRIPTION
Icon Function
Stop/ Reset
Start
Manual
Auto
Gens Close/Open
Close
Open
Set/ Confirm
Up/Increase
Down/Decrease
Home/Return
HGM6100N Genset Controller
HGM6100N Series Genset Controller User Manual
Table 3 – Keys Description
Can stop generator under Manual/Auto mode; Can reset shutdown
alarm; Press this key at least 3 seconds to test panel indicators are OK or
not(lamp test);
During stopping process, press this key again can stop generator
immediately.
Start genset under Manual or Manual Test mode.
Pressing this key will set the module as Manual mode.
Pressing this key will set the module as Auto mode.
Can control gens to switch on or off in Manual mode.
Note: the key is fit for HGM6120 series controllers.
Can control gens to switch on in Manual mode.
Note: the key is fit for HGM6110 series controllers.
Can control gens to switch off in Manual mode.
Note: the key is fit for HGM6110 series controllers.
Press this key to enter menu interface;
Shift cursor to confirm In parameters setting menu.
Screen scroll;
Up cursor and increase value in setting menu.
Scroll screen;
Down cursor and decrease value in setting menu.
Return to homepage when in main interface;
Exit when in parameters setting interface.
2019-03-28
Description
Version 1.5 Page 8 of 42