Board Setup - Xilinx ML505 Getting Started Tutorial

Board Setup

Board Setup
1.
2.
3.
www.BDTIC.com/XILINX
10
Position the ML50x board so the Xilinx logo is in the lower left corner.
Make sure the power switch located in the upper right corner is in the OFF position.
Locate the CF card slot (on the back side of the ML50x board), and carefully insert the
System ACE™ CF card with its front label facing away from the board.
the back side of the board with the CF card properly inserted.
Note:
The CF card provided with your board might differ.
Caution!
Be careful when inserting or removing the CF card from the slot. Do not force it.
Figure 1: ML50x Evaluation Platform with CF Card
www.xilinx.com ML505/ML506/ML507 Getting Started Tutorial
UG348 (v3.0.2) October 9, 2008
R
Figure 1 shows
UG348_01_110906