Xilinx ML505 Getting Started Tutorial page 12

Board Setup
7.
8.
www.BDTIC.com/XILINX
12
Use the pull-down menu to set the COM1 properties
♦
Bits per second = 9600
♦
Data bits = 8
♦
Parity = None
♦
Stop bits = 1
♦
Flow control = None
Click OK → OK to accept settings
♦
Figure 4: COM1 Properties Setup
Select File → Properties.
Select the Settings tab and click on ASCII Setup
www.xilinx.com
(Figure 4) to the following:
UG348_04_040408
(Figure 5, page 11).
ML505/ML506/ML507 Getting Started Tutorial
UG348 (v3.0.2) October 9, 2008
R