ML50x Demonstrations in System ACE CF
ML50x Demonstrations in System ACE CF
Bootloader Demonstrations
To select configuration using System ACE CF, set the configuration address and mode DIP
switch (8-position DIP switch) to 00010101. To return to the ML50x Bootloader at
anytime, press the SYSACE RESET button.
Location
System ACE configuration address 0.
Description
The ML50x Bootloader demonstration displays a menu of demonstration designs that can
be loaded by using the System ACE controller's reconfiguration feature. The menu is
displayed on the serial terminal, LCD, and VGA.
To choose a demonstration, use the North-East-South-West-Center-oriented pushbuttons
on the board
Alternatively, you can select a demonstration by entering its number into the serial
terminal.
The demonstrations are:
•
•
•
•
•
•
•
•
www.BDTIC.com/XILINX
14
(Figure
6), then press the center button to start the demonstration.
West (W)
"Virtex-5 FPGA Slide Show," page 15
"Web Server (ML505/ML506 - Using Soft Ethernet MAC IP Core)," page 16
"Web Server (ML507 - Using Integrated Tri-Mode Ethernet MAC Block)," page 18
"Simon Game," page 20
"Board Verification Using XROM," page 21
"USB," page 22
"My Own ACE File," page 23
"Ring Tone Player," page 24
www.xilinx.com
North (N)
South (S)
Figure 6: User Pushbuttons
ML505/ML506/ML507 Getting Started Tutorial
Center (C)
East (E)
UG228_06_040408
UG348 (v3.0.2) October 9, 2008
R