Connecting Probes And Sensors To The Console - Veeder-Root TLS-3 Series Site Prep And Installation Manual

Connecting Probe/Sensor Wiring to Consoles
POWER AREA
GROUND
INPUT 1
BACKUP GENERATOR
INPUT 2
RELAY 1
OVERFILL ALARM OUT
RELAY 2
GROUND
AC POWER
consoles\30cirdir.eps

CONNECTING PROBES AND SENSORS TO THE CONSOLE

Figure 54 contains wiring connection examples for the probes and sensors listed below. Only ground the probe/
sensor shields at the console, not at their field junction boxes. Probes wires connect to the probe terminal block
and sensors connect to the sensor terminal block.
Mag Probe
Interstitial sensors for fiberglass/steel tanks
Sump sensors
Discriminating Dispenser Pan sensors
Discriminating containment sump sensors
Hydrostatic sensors (for all double-wall tanks)
Connected to:
Connected to:
Connected to:
Connected to:
L1
G
N
Device
INTRINSICALLY SAFE AREA
GROUND
SENSOR LOCATIONS
1.
TANK 1 - INTERSTIAL
2.
TANK 1 - SUMP
3.
TANK 2 - INTERSTIAL
4.
TANK 2 - SUMP
5.
TANK 3 - INTERSTIAL
6.
TANK 3 - SUMP
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
PROBE LOCATIONS
1.
TANK 1 - REGULAR
2.
TANK 2 - PLUS
3.
TANK 3 - EXTRA
4.
5.
6.
7.
8.
Figure 53. Fixed-Feature Console System Circuit Directory
Wires Observe Polarity
2
2
2
2
2
2
55
TLS-300/ProPlus/EMC Basic Consoles
Yes
No
No
No
No
No