Special Mag Probe Installation Kits; Ast Installation Kit; Figure 12. Mag Probe Ast Installation Kit - Veeder-Root TLS-3 Series Site Prep And Installation Manual

Special Mag Probe Installation Kits

In addition to the Mag Probe installation kits shipped with each probe (containing floats, spacer rings, cable, etc.),
your installation may also require one or more of the special kits described in this section.

AST Installation Kit

This kit is recommended when installing Mag Probes into an above ground storage tank (AST). This kit contains a
length of flexible conduit, connectors, etc., for easier probe access. The kit contents are listed in Table 2 and
shown in Figure 12.
Quantity
5 feet
1
2
1
Note: watch orientation
of bevels and tapers
when assembling these
cord grip components.
Cord Grip
Nut
Bushing
Body
Cord Grip Fitting
Table 2. Mag Probe AST installation kit - Part No. 312020-984
Description
3/8" Flexible conduit
3/8" Adaptor nut
3/8" Straight liquidtite connectors and related
parts
Cord Grip Group
Nut
Ferrule
Body
fitting
O-ring
Adaptor Nut
(Connects to riser cap)
3/8'' Liquidtight Connector Assembly
At Riser Cap
19
Part Number
576008-294
329972-002
576008-295
331028-001
3/8'' Flexible Conduit
(Plastic coated 5-foot
length, 0.72 '' OD x 0.42'' ID)
Nut
Ferrule
Body
fitting
O-ring
Locking nut
3/8'' Liquidtight Connector Assembly

Figure 12. Mag Probe AST Installation Kit

probes/astkit.eps
J-box
At J-Box